Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 17:36:57 GMT -5
|
Post by Deleted on May 11, 2013 13:06:44 GMT -5
When I took off the pipe on my T3 I saw no gasket. I assume it looks like this....http://www.scootusa.com/carb-4-stroke/588.jpg
THen I look up into the head as best I can and see what maybe another that looks like this....http://www.sc00ters.com/index.php?main_page=popup_image&pID=24
But I cant seem to remove it.
So whats the correct gasket?
|
|
|
Post by teddy554 on May 11, 2013 13:46:29 GMT -5
You can use either style but I prefer the first one easier ti keep in place when putting muffler back on
|
|
|
Post by triker on May 11, 2013 23:30:11 GMT -5
[replyingto=redroush00]redroush00[/replyingto]The first link is an intake manifold spacer. I use a sheet of header gasket material From Mr Gasket I get at an auto parts store. The stuff is tough but can be cut with an x- acto knife.
Roy
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 17:36:57 GMT -5
|
Post by Deleted on May 12, 2013 13:29:03 GMT -5
|
|