New Rider
Currently Offline
Posts: 39
Likes: 1
Joined: Mar 13, 2013 11:36:18 GMT -5
|
Post by oldscoot50 on May 6, 2013 15:50:17 GMT -5
Is it safe to use? I have a JCL Mp-150-B (150cc)..My scooter seems to be running fairly well, but when I bought it, it had been in storage for a few months and I put it away over the winter, had mixed some STA-BIL fuel stabilizer in with gas ran it for little while then tucked it neatly away..So if the Chemtool is safe to use, what would the reccommended amount to add to full tank of gas???
|
|
|
|
Post by hank on May 6, 2013 15:54:18 GMT -5
|
|
|
|
Post by prodigit on May 6, 2013 16:18:12 GMT -5
In my 1 gal tank I poured in ~1/4th of the bottle.
The bottle is meant for upto a 20gal tank, but if you increase the ratio a bit, doesn't harm.
|
|
|
|
Post by carasdad on May 6, 2013 19:09:47 GMT -5
In my 1 gal tank I poured in ~1/4th of the bottle. The bottle is meant for upto a 20gal tank, but if you increase the ratio a bit, doesn't harm. Replace that 4 oz of sea foam with Xylene. Not only will you have a super clean carb...your octane will be higher..and BTU's higher...so you will have a cleaner carb..no pump gas ping...and a power increase from the additional BTU's. a 3 in 1 deal!.  |
|
