Post by jjt on Apr 19, 2019 0:24:01 GMT -5
I haven’t been on for a while due to work being so busy. That being said I’ve had my 180cc big bore kit and stroker crank sitting around long enough. I’m going to start building it this weekend or next. My question is about the clutch settings to start with for this added power. I have the dr pulley variator that I’m going to run with 15 sliders. I have the oko clutch with snowflake bell. Any idea what springs I should put in to start with and for break in of the new engine. I have the red yellow and a blue main spring and I believe the same ones for the little clutch springs. Engine set up is 180cc big bore kit from ssp-g with oil cooler. Head. Cam. Cases etc. and a +2.5 stroker crank. 188cc total I believe. 28mm carb. Uni filter. Can’t remember what exhaust it is but it’s a straight thru perforated baffle. I’m 200 pounds and not sure the weight of the scooter. Any help on initial spring set up is appreciated
