New Rider
Currently Offline
Posts: 3 
Likes: 0
Joined: May 18, 2017 14:03:45 GMT -5
|
Post by tyzee on May 18, 2017 14:05:51 GMT -5
Recently installed a new crankshaft seal and while driving it popped out.
|
|
|
|
Post by cyborg55 on May 18, 2017 17:17:02 GMT -5
Drag,,, crankcase vented ok?
|
|
New Rider
Currently Offline
Posts: 3
Likes: 0
Joined: May 18, 2017 14:03:45 GMT -5
|
Post by tyzee on May 18, 2017 17:36:59 GMT -5
Drag,,, crankcase vented ok? How could i check if the crankcase is venting properly |
|
|
|
Post by cyborg55 on May 18, 2017 21:44:09 GMT -5
See if the vent tube is kinked,, that may be a problem
|
|
New Rider
Currently Offline
Posts: 3
Likes: 0
Joined: May 18, 2017 14:03:45 GMT -5
|
Post by tyzee on May 18, 2017 21:49:31 GMT -5
See if the vent tube is kinked,, that may be a problem it doesnt have a hose.. Its just an open hole with gridded cover |
|
|
|
Post by cyborg55 on May 18, 2017 21:54:20 GMT -5
May have been a smaller OD than the original ,, couple threads started about that just this last year
|
|
|
|
Post by onewheeldrive on May 19, 2017 0:16:49 GMT -5
See if the vent tube is kinked,, that may be a problem it doesnt have a hose.. Its just an open hole with gridded cover Your valve cover nipple has a "griddled" cover? Sounds more like a CVT case vent cover you are describing. |
|
