Post by grymus on Apr 11, 2017 13:34:08 GMT -5
Hi folks!
After looking around this seems like a good sub to start in Soooooooo....
I was given a 2 Stroke Italian moped fresh out of the barn and need help ID'ing it.
I'm pretty sure the engine is a Motori Minarelli V1 50cc 2 Stroke but it's the moped that's giving me fits.
I think it's some version of a Fantic motor's Concord. Year make and model number are needed.
I do get compression when I pull on the clutch lever on the engine and pedal.
The drum brakes still work (Would like to change out rims but that's another post)
My first issue after identifying it will be to get the engine running but as you'll see in the photos
( See Photobucket folder link below ) wiring has been cut up.
The 3 wires leaving the Stator/Magneto have been cut.
Stator Magneto wiring IMG
The wires that go into the frame near that area are a different color.
On the Ignition Coil, there are some wires not connected:
Ignition Coil & Wires IMG
And Cut wiring on the front:
Cut wiring: Front IMG
So, to sum it up:
Phase 1:
ID Moped.
Fix wiring so that, electrically, the motor will run ( lights and such later )
Help finding a carb that will work with the engine on the cheap ( See reason Here )
This will help me decide if I should move on to the next phase or scrap it
Any info/links would be greatly appreciated.
Phase 2:
I will be looking for parts. Rims,Throttle,Exhaust,Cables and any other stuff I'll be needing and anything dealing with the engine like Covers,Fans. So if I could be pointed in the right direction (Sub) it might save an Admin the trouble of moving it
Please feel free to view my folder of photos about this moped @ PhotoBucket: 2 Stroke Moped
Thanks in advance!
After looking around this seems like a good sub to start in Soooooooo....
I was given a 2 Stroke Italian moped fresh out of the barn and need help ID'ing it.
I'm pretty sure the engine is a Motori Minarelli V1 50cc 2 Stroke but it's the moped that's giving me fits.
I think it's some version of a Fantic motor's Concord. Year make and model number are needed.
I do get compression when I pull on the clutch lever on the engine and pedal.
The drum brakes still work (Would like to change out rims but that's another post)
My first issue after identifying it will be to get the engine running but as you'll see in the photos
( See Photobucket folder link below ) wiring has been cut up.
The 3 wires leaving the Stator/Magneto have been cut.
Stator Magneto wiring IMG
The wires that go into the frame near that area are a different color.
On the Ignition Coil, there are some wires not connected:
Ignition Coil & Wires IMG
And Cut wiring on the front:
Cut wiring: Front IMG
So, to sum it up:
Phase 1:
ID Moped.
Fix wiring so that, electrically, the motor will run ( lights and such later )
Help finding a carb that will work with the engine on the cheap ( See reason Here )
This will help me decide if I should move on to the next phase or scrap it
Any info/links would be greatly appreciated.
Phase 2:
I will be looking for parts. Rims,Throttle,Exhaust,Cables and any other stuff I'll be needing and anything dealing with the engine like Covers,Fans. So if I could be pointed in the right direction (Sub) it might save an Admin the trouble of moving it
Please feel free to view my folder of photos about this moped @ PhotoBucket: 2 Stroke Moped
Thanks in advance!
