|
|
Post by gy6er on Jun 20, 2016 18:37:18 GMT -5
So my bike is new and ran good til a week ago, now she only starts...throttle on and she putters/chokes and don't move. Only thing I checked was lines/hoses and carb diaphram. Any advice,I will be thankful for. Rider love, B
|
|
|
|
Post by lain on Jun 23, 2016 11:23:09 GMT -5
So my bike is new and ran good til a week ago, now she only starts...throttle on and she putters/chokes and don't move. Only thing I checked was lines/hoses and carb diaphram. Any advice,I will be thankful for. Rider love, B If it's brand new bring it back to where you got it, claim it has a defect and demand they fix it. You say it's an 80cc, but they don't sell unmodified scooters as 80cc, so it could be a rebuilt engine, a project, or a used and refurbished scooter sold as new after some work to make it "new." From the description you give... I say we need more info. Check for spark, check to make sure your getting gas thru the carb, check valve clearances, if it's 80cc and not jetted properly could also be that... so many different issues cause those symptoms. |
|
|
|
Post by gy6er on Jun 23, 2016 16:34:29 GMT -5
No, it's my new rx-50 (wolf)...I did hoca kit on. I know I should look at valves and bolts under there,but was jus wondering if anybody has had the same experience out of luck. Ran like a champ and up and stopped one day when first turned on. Thanks for response though. Having surgery tomorrow so I'm down a month, but I'll get on it right soon as I can.
|
|
