Removing alarm installed at factory

Senior Rider

Currently Offline

Solving one problem after another

Posts: 1,566

Likes: 228
Joined: Dec 16, 2014 10:54:33 GMT -5

Removing alarm installed at factory by: lain - May 30, 2015 13:22:36 GMT -5

Reply Quote

Post by lain on May 30, 2015 13:22:36 GMT -5

The steelmate alarm works great, but it drains too much power in a ride that is only used once a week. Not to mention it is a DC operated scooter so the battery level is invaluable. Too low and the ride won't start, even with a kick.

So the alarm seems to be plugged into a connector in the main harness. When disconnected the scooter will not start. What wires need to be crossed to fix this?

I'm guessing the pink and grey wires that go to the alarm control the ignition cutoff? So maybe those?

Last Edit: May 30, 2015 13:23:21 GMT -5 by lain

Senior Rider

Currently Offline

2021 Vitacci Spark 150

Posts: 4,139

Likes: 791
Joined: May 13, 2013 17:55:08 GMT -5

Removing alarm installed at factory by: geh3333 - May 30, 2015 23:52:05 GMT -5 via mobile

Reply Quote

Post by geh3333 on May 30, 2015 23:52:05 GMT -5

May 30, 2015 13:22:36 GMT -5 lain said:

The steelmate alarm works great, but it drains too much power in a ride that is only used once a week. Not to mention it is a DC operated scooter so the battery level is invaluable. Too low and the ride won't start, even with a kick.

So the alarm seems to be plugged into a connector in the main harness. When disconnected the scooter will not start. What wires need to be crossed to fix this?

I'm guessing the pink and grey wires that go to the alarm control the ignition cutoff? So maybe those?

Dmartin should be able to tell you exactly what you need to do .

63mm bbk
61mm head with roller rockers
Taida clutch and varistor
15 gram rollers
High flow oil pump
Taida high torque starter
18:36 final drive gears
Oil cooler with oil temp gauge
30mm flatside carb 125 main jet
So far 81mph on the interstate

keikara PM keikara keikara's Posts keikara's Threads Sophomore Rider Currently Offline Posts: 220 Likes: 51 Joined: Mar 19, 2014 15:02:42 GMT -5	Removing alarm installed at factory by: keikara - May 31, 2015 1:07:30 GMT -5 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by keikara on May 31, 2015 1:07:30 GMT -5 Don't know if this is the same as what you have but looks like when you remove then have to rehook the wires that were connected to the pink and grey coming from alarm.
	Last Edit: May 31, 2015 1:08:16 GMT -5 by keikara 1985 kawasaki 750 bobber retired (2013 Jonway 150cc scooter 11pole stator, red racing cdi, and red coil, uni filter. 102 main 45 pilot jets. Micheline City Grip 130/70/13 tires.)

Removing alarm installed at factory By lain (Read 431 times)

Post by lain on May 30, 2015 13:22:36 GMT -5

Post by geh3333 on May 30, 2015 23:52:05 GMT -5

Post by keikara on May 31, 2015 1:07:30 GMT -5

Shoutbox