|
|
Post by rcq92130 on Apr 9, 2015 13:35:09 GMT -5
I have one of these 30mm pumper carburetters installed and would like to REPLACE THE NEEDLE VALVE IN THE FLOAT BOWL   Anyone have any idea what needle valve to get, or what float height spec to follow? |
|
|
|
Post by JerryScript on Apr 9, 2015 14:26:37 GMT -5
I would contact whoever you bought it from, ask for a part number, and if they carry the part(s) you need.
|
|
|
|
Post by rcq92130 on Apr 9, 2015 16:15:18 GMT -5
I would contact whoever you bought it from, ask for a part number, and if they carry the part(s) you need. Tried that w/o success. In fact, a number of online people sell this thing, but none seem to know anything about parts for it. |
|
|
|
Post by jerseyboy on Apr 9, 2015 17:34:09 GMT -5
I wonder if its the same size needle as a stock 24mm? If so I got one you can have,,measure it up,,for float height usually about 20mm of fuel in the bowl is good..maybe somebody has an exact measurement...if not just pull the fuel line after the bowl is full and measure for about 20mm of fuel in the bowl give or take a mm  |
|
