Post by organdoughnut on Mar 22, 2013 16:04:21 GMT -5
Heya guys,
I'm having massive issues with this longjia digita 51 (2011 plate ) with a gy6 50cc engine, before November the bike was running fine then it needed a valve adjustment, he said he removed the fan to find tdc re-adjusted the valves to 0.004 inlet and 0.003 exhaust, the bike was running great so he went for a spin to make sure everything is ok when he came back he went to bolt on the fan and used the wrong bolts crushing the stator, he then asked for my help so I replaced the stator ( 4 months later Because it took scrappy dog scooters 4 months to deliver it which is stupid, so 4 months later I replace the generator and the battery and the spark plug, the bike is now sparking again but when he went for a ride it ran for 1 minuet then died and it has not been the same since, changed the fuel , re - adjusted the valves, checked timing , cleaned carb , but when I try and start the bike it runs for 5 seconds then dies and takes ages to re-start. There is loads of fuel coming out of the air inlet on the carburetor, the float is not sticking and the carb is clean, do you guys have any suggestions ? Because I'm stumped
Thanks guys and girls, Danny
I'm having massive issues with this longjia digita 51 (2011 plate ) with a gy6 50cc engine, before November the bike was running fine then it needed a valve adjustment, he said he removed the fan to find tdc re-adjusted the valves to 0.004 inlet and 0.003 exhaust, the bike was running great so he went for a spin to make sure everything is ok when he came back he went to bolt on the fan and used the wrong bolts crushing the stator, he then asked for my help so I replaced the stator ( 4 months later Because it took scrappy dog scooters 4 months to deliver it which is stupid, so 4 months later I replace the generator and the battery and the spark plug, the bike is now sparking again but when he went for a ride it ran for 1 minuet then died and it has not been the same since, changed the fuel , re - adjusted the valves, checked timing , cleaned carb , but when I try and start the bike it runs for 5 seconds then dies and takes ages to re-start. There is loads of fuel coming out of the air inlet on the carburetor, the float is not sticking and the carb is clean, do you guys have any suggestions ? Because I'm stumped
Thanks guys and girls, Danny
