New Rider
Currently Offline
Posts: 20
Likes: 0
Joined: Jul 12, 2014 20:11:41 GMT -5
|
Post by southerner on Jul 14, 2014 19:57:28 GMT -5
Can anyone tell me what the thread pitch is on/for the 6mm bolts used in the GY6C 150cc scooters? Mine has no nut on the bolt that holds the plastic panel that has the glove box in it from bouncing. I can find no nut that will start on it and too tight to get a die on to chase the threads. I tried using a file to chase the threads but still can find no nut that fits it. Is it .1 or is it .75 pitch? The parts manual I found online I can not even identify the part or see it but am sure it is 6mm. Barring that I need to replace that bolt and not sure how it is inserted and from where. It is annoying to have that plastic boucing back and forth as I ride.
|
|
|
|
Post by alleyoop on Jul 14, 2014 20:11:14 GMT -5
They are usually 1.25 pitch, is the bolt FINE THREAD or COURSE thread, fine thread are really close together.
Alleyoop
|
|
New Rider
Currently Offline
Posts: 20
Likes: 0
Joined: Jul 12, 2014 20:11:41 GMT -5
|
Post by southerner on Jul 15, 2014 20:18:54 GMT -5
They are usually 1.25 pitch, is the bolt FINE THREAD or COURSE thread, fine thread are really close together. Alleyoop The smallest 1.25 pitch bolt I could find at the hardware store was a 8mm. Are you sure the 6mm bolts are 1.25 pitch? I posted in another thread a want for a service manual for my GY6C 150cc because the parts manuals I have found online are so blurry as to be unreadable and I could not even find that bolt shown or listed and where I found 6mm bolts they did not mention the thread pitch. |
|
..BAD TO THE BONE..