Post by nightwishkid on Mar 25, 2014 21:57:03 GMT -5
(new to forums tank you for taking the time to read about my issue)
(long story with background)
I have one of those Chinese scooters. I have a peace 804 150cc, has 650 miles on it, daily rider.
I bought it about 6 months ago. after about 400 miles it only had half throttle and couldn't go over 45. I just left it as it b/c i am too poor to fix it. but saw a video talking about the carburetor diaphragm and it may be adjustable. So i opened it up and it was all melted (chemical not heat). Went to many places and no one had the part. Went back to the purchase place (that i don't care for) and they gave me a used one for free (i love free).
I am just afraid of it happening again! I have scoured the web for many hours and days, and i cant find a diaphragm for the gy6b (the gy6 doesn't fit). I even looked for a different carb. but most people say that other carbs hit the frame. Anyone have any experience putting a different carb on a gy6b?
(On a side note, the diaphragm rubber part didn't seem to fit perfectly, seems too loose. but it does run but kinda hesitates when throttle is applied. i don't know if i can put make a gasket around the outside to get a better seal or not.)
one again, thanks for reading!! \(^.^)/ Q(-.-Q)
(long story with background)
I have one of those Chinese scooters. I have a peace 804 150cc, has 650 miles on it, daily rider.
I bought it about 6 months ago. after about 400 miles it only had half throttle and couldn't go over 45. I just left it as it b/c i am too poor to fix it. but saw a video talking about the carburetor diaphragm and it may be adjustable. So i opened it up and it was all melted (chemical not heat). Went to many places and no one had the part. Went back to the purchase place (that i don't care for) and they gave me a used one for free (i love free).
I am just afraid of it happening again! I have scoured the web for many hours and days, and i cant find a diaphragm for the gy6b (the gy6 doesn't fit). I even looked for a different carb. but most people say that other carbs hit the frame. Anyone have any experience putting a different carb on a gy6b?
(On a side note, the diaphragm rubber part didn't seem to fit perfectly, seems too loose. but it does run but kinda hesitates when throttle is applied. i don't know if i can put make a gasket around the outside to get a better seal or not.)
one again, thanks for reading!! \(^.^)/ Q(-.-Q)
