"LAT" (Laugh at This!) Drag scoot build....ideas welcome!
by: 99owned - Oct 17, 2013 21:01:13 GMT -5
Post by 99owned on Oct 17, 2013 21:01:13 GMT -5
First off, i'm sorry I don't have any pics of the scoot right now.... as it is just a frame. stripped completely. (Even paint).... and my camera recently broke. So i'm SOL on that end of things for now.... (money going into build).
Right now, I have an engine that as a "80cc" kit in it, and a DLH perf. variator, and trans. gears.
My plan for the engine:
44mm Stroker Crank
Need an idea for a good clutch assembly
A9 perf. cam
50mm BBK
Need ideas on gearing
Need ideas on sliders/rollers?
Getting a custom domed piston to fit the 50mm kit from Wiseco or Diamond race pistons
Performance head (cut for the domed piston)
Unlimited CDI
RED Coil
24mm Carb
150cc intake
UNI Filter
Ideas for a throaty sounding exhaust?
NOS Wet kit from ColdFusion. (This is where the domed piston comes to play)
Plans for frame:
Stripped down of un-necessary tabs/hangers/mounts
Stretched and lowered
Chopped front end
Welded pegs
Was thinking about making some sort of custom bullet shaped body....ideas?
Once all the welding is done, get it powdercoated red >
Need some ideas for tires..... Have no clue what i'm going to use, (THIS WILL NOT BE STREET LEGAL)
Wish me luck! Biggest project i've done in a while.... goal is to hit 80-
MPH 1/8 mile
Right now, I have an engine that as a "80cc" kit in it, and a DLH perf. variator, and trans. gears.
My plan for the engine:
44mm Stroker Crank
Need an idea for a good clutch assembly
A9 perf. cam
50mm BBK
Need ideas on gearing
Need ideas on sliders/rollers?
Getting a custom domed piston to fit the 50mm kit from Wiseco or Diamond race pistons
Performance head (cut for the domed piston)
Unlimited CDI
RED Coil
24mm Carb
150cc intake
UNI Filter
Ideas for a throaty sounding exhaust?
NOS Wet kit from ColdFusion. (This is where the domed piston comes to play)
Plans for frame:
Stripped down of un-necessary tabs/hangers/mounts
Stretched and lowered
Chopped front end
Welded pegs
Was thinking about making some sort of custom bullet shaped body....ideas?
Once all the welding is done, get it powdercoated red >
Need some ideas for tires..... Have no clue what i'm going to use, (THIS WILL NOT BE STREET LEGAL)
Wish me luck! Biggest project i've done in a while.... goal is to hit 80-
MPH 1/8 mile
Main Jet
and it started as a 150. A 150 might be a better place for you to start, tho. BBK, stroker crank, upgear, variator, HP head.... a trip to the machine shop to have the case clearanced.... and who knows.
