New Rider
Currently Offline
Posts: 23
Likes: 0
Joined: Aug 25, 2013 15:41:02 GMT -5
|
Post by cravenscoot on Sept 7, 2013 10:16:36 GMT -5
Anybody know how to find it on a scoot(50cc) and does anybody know how to bypass it  |
|
Freshman Rider
Currently Offline
Posts: 77
Likes: 1
Joined: Feb 26, 2013 21:10:09 GMT -5
|
Post by rae4180 on Sept 7, 2013 19:14:36 GMT -5
[replyingto=cravenscoot]cravenscoot[/replyingto]Easy fix disconect from switch and hook up a toggle switch right to the starter, just make sure your ground wire is grounded to the frame. I have mine under my seat so its locked up. you can stell use your key to lock the bike up.
|
|
Freshman Rider
Currently Offline
Posts: 88
Likes: 0
Joined: Mar 4, 2013 23:23:52 GMT -5
|
Post by woowilly on Sept 8, 2013 18:29:51 GMT -5
on my Chinese scooter, +12 for accessories is on from the key switch when keyswitch is in on position.
+12v power to the brake light switches is from the accessory wire out of the keyswitch.
+12v power to the starter relay coil is from the wire that goes to the brakelight.
( gotta pull a brake lever to get power to the starter relay. The brake light also comes on...)
the start button just grounds the other side of the starter relay coil when pressed.
Wiring the +12v side of the starter relay coil to the keyswitch accessory terminal instead of the brakelight wire
will eliminate the need to pull a brake lever to start.
( the starter button will still do nothing when the key is in your pocket.)
|
|
|
|
Post by shalomrider on Sept 8, 2013 19:53:51 GMT -5
howdy, i was gonna make a suggestion then while considering how to word it, realized it was just plain silly. here's deciding not to---
lotsa miles and smiles to ya
ken
|
|
New Rider
Currently Offline
Posts: 23
Likes: 0
Joined: Aug 25, 2013 15:41:02 GMT -5
|
Post by cravenscoot on Sept 9, 2013 11:09:16 GMT -5
So if the start button turns the engine over then the brake safty switch is bypassed. cause my scoot will turn over but wont start. im getting gas and spark. just replaced my carb. coil.pkug and cdi. fuel line and filter. i got it kick started a few times by kicking it. Ran fine once it started butn nwont start with push button. and i have to kick on it forever to get it to start. useing the star button it acts like it tryin to start but wont.
|
|
Sophomore Rider
Currently Offline
Posts: 112
Likes: 1
Joined: May 23, 2013 14:46:26 GMT -5
|
Post by nwhicks21 on Sept 9, 2013 11:50:55 GMT -5
Adjust valves and check your compression
|
|
main jet