Sophomore Rider
Currently Offline
Posts: 201
Likes: 0
Joined: Mar 13, 2013 8:01:35 GMT -5
|
Post by burnrubber on Aug 23, 2013 7:50:16 GMT -5
Had a perfect running carb. until I cleaned it.But at the time I didn't know it was the fuel valve (petcock) My enricher worked perfect until I cleaned my carb.Now it dont want to tack out to 4gran like before and slowly idle down until it's warmed up.Cold start it only tacks out about 3 grand for a few seconds and it drops down to idle1,500 gran before it warms up,but not warmed up.Enricher gets pretty warm so it seems to be working. I've had this problem before only having to replace the carb. several times. what could be going on?? Is it just a coincidence?? Yes it's very confusing. I'm lost again.
|
|
Sophomore Rider
Currently Offline
Posts: 201
Likes: 0
Joined: Mar 13, 2013 8:01:35 GMT -5
|
Post by burnrubber on Aug 23, 2013 11:42:45 GMT -5
What brand of carb. would you guys & gals recommend in a 19mm CVK carb.? I've used those Kung Fu brand (JAPAN) with not much luck. Do have a good question though. Bonehead mistake? When I was cleaning the carb. I did spray carb. cleaner on the dipram and it shriveled up pretty bad but when it dried out it went back to normal size. Should I put a new one in??
|
|
Sophomore Rider
Currently Offline
Posts: 117
Likes: 0
Joined: Mar 13, 2013 19:46:35 GMT -5
|
Post by pgs on Aug 23, 2013 14:49:38 GMT -5
|
|
Sophomore Rider
Currently Offline
Posts: 201
Likes: 0
Joined: Mar 13, 2013 8:01:35 GMT -5
|
Post by burnrubber on Aug 23, 2013 17:58:41 GMT -5
[replyingto=pgs]pgs[/replyingto]WOW!!! What a price! That must have some gold in it?? LOL!!! Hey If it works like I want it to, It's worth it man!
|
|