Post by fleetingyouth on Aug 15, 2013 21:03:47 GMT -5
Hello I went to adjust my valves today while I had all the plastics off hoping it would solve the problem Ive been having since the winter.
When I went to set TDC i realized the sprocket and the silver washer like thing on top are lined up so the holes go straight through both. So this doesn't let you see the mark to line it up.
Here is hat it should look like.
i173.photobucket.com/albums/w59/RubiconTX/scooter/scoot001.jpg
So what I did was get it so both valves where up and full compression with the arrow near the oil plug lined up. It looked like it was close to where the line should be so I hope it was right.
When I went to set TDC i realized the sprocket and the silver washer like thing on top are lined up so the holes go straight through both. So this doesn't let you see the mark to line it up.
Here is hat it should look like.
i173.photobucket.com/albums/w59/RubiconTX/scooter/scoot001.jpg
So what I did was get it so both valves where up and full compression with the arrow near the oil plug lined up. It looked like it was close to where the line should be so I hope it was right.
..BAD TO THE BONE..