|
|
Post by sailracer on Aug 11, 2013 9:47:58 GMT -5
I had planned on installing a new hoca piston in a scrappydog BBK & head. I was going to do a compression test with both 1 and 2 base gaskets, but i'm pretty sure 1 gasket would yeild too much. I am going to install the two bases. Can I also use 2 head gaskets without a problem? or should I just use the 1?
|
|
|
|
Post by devo344a on Aug 11, 2013 9:52:46 GMT -5
You have to watch out for the cam chain leingth you will make it to short with 2 many gaskets mine would only take one base gasket and a tin head gasket or it broke the chain
|
|
|
|
Post by sailracer on Aug 11, 2013 10:05:49 GMT -5
yeah, thats what i'm afraid of, with 1 base gasket though, I think compression will be over220 psi, no good
|
|
|
|
Post by millsc on Aug 11, 2013 11:42:04 GMT -5
All pistons aren't compatible with all cylinders I tried a hoca piston on a ebay 50mm cylinder didn't work the hoca was slightly bigger rubbed the cylinder walls
|
|
jet
