Sophomore Rider
Currently Offline
Posts: 111
Likes: 1
Joined: Jul 20, 2013 15:21:16 GMT -5
|
Post by paulgendek on Jul 26, 2013 12:42:14 GMT -5
With all the exhaust talk lately, I've been thinking about replacing mine. I'm looking at you pros out there. I need help finding something on eBay or elsewhere that won't blow up, ideally in black or carbon fiber, that you can confidently say will fit on my scoot. Good luck and thanks in advance!
|
|
Sophomore Rider
Currently Offline
Posts: 111
Likes: 1
Joined: Jul 20, 2013 15:21:16 GMT -5
|
Post by paulgendek on Jul 26, 2013 13:54:28 GMT -5
In the meantime, I drilled. There was a metal end cap with 3 screws, so I just drilled through the screw holes with a 1/8" Dremel bit. I can plug each hole with a screw, or put the whole cap back on, so it seemed like a worthy mod. Metal cap: cl.ly/image/2B11131N1Y1bScrew holes: cl.ly/image/0V0r2P1r0J0XAir is definitely coming out of the holes, but I don't think it's significantly louder. I noticed that my RPMs increased off the line, and I may have gotten better acceleration. |
|
|
|
Post by domindart on Jul 26, 2013 14:08:32 GMT -5
more powah!  |
|
Currently Offline
Posts: 0
Likes:
Joined: May 20, 2024 20:35:48 GMT -5
|
Post by Deleted on Jul 26, 2013 15:20:24 GMT -5
Performance pipes just look better.
|
|
|
|
Post by scoots on Jul 26, 2013 16:54:36 GMT -5
|
|
|
|
Post by jerseyboy on Jul 26, 2013 17:11:47 GMT -5
Dont forget to complete the system for full efficiency of the motor with a free flow air filter,,then up jet the carb,,and you will be flyin like me  Never mind just saw your sig,,you have the filter and bigger jet |
|
Sophomore Rider
Currently Offline
Posts: 111
Likes: 1
Joined: Jul 20, 2013 15:21:16 GMT -5
|
Post by paulgendek on Jul 27, 2013 10:42:00 GMT -5
Thanks, scoots. I just ordered that carbon one.
|
|
|
|
Post by scoots on Jul 27, 2013 17:06:56 GMT -5
sweeet send pics and videos
|
|
main jet
