New Rider
Currently Offline
Posts: 1
Likes: 0
Joined: Jun 19, 2013 0:01:01 GMT -5
|
Linhai 260
by: xtom - Jun 29, 2013 20:35:45 GMT -5
Post by xtom on Jun 29, 2013 20:35:45 GMT -5
Is anyone familiar with the part called "Freeze Proof Device" 42519 Part number: 06-034-3624. The only place I've found it is Mr. Scooter. I'm curious to know what it does. What is its purpose? if anyone knows. Thanks.
|
|
|
|
Linhai 260
by: alleyoop - Jun 29, 2013 21:06:00 GMT -5
Post by alleyoop on Jun 29, 2013 21:06:00 GMT -5
Many dealers have that part, Have to find a diagram showing where it goes. I went to about 5 dealers they show the part but not where it plugs into. I did find a diagram it shows it by the fuel tank that sits under the seat.
Alleyoop
|
|
|
|
Linhai 260
by: domindart - Jun 29, 2013 22:29:56 GMT -5
Post by domindart on Jun 29, 2013 22:29:56 GMT -5
 from hotlanta, xtom!
|
|
Sophomore Rider
Currently Offline
Posts: 186
Likes: 37
Joined: Jun 13, 2013 15:39:09 GMT -5
|
Linhai 260
by: novaraptor - Jul 2, 2013 13:41:18 GMT -5
Post by novaraptor on Jul 2, 2013 13:41:18 GMT -5
Orson Reedy asked that same question in 2008 on ScootDawg. They didn't have an answer then either.. the bike in question then was an Aeolus 300.
My SWAG would be an unused connector for an optional but never deployed fuel line heater. But then again, in translation, I have ran into "raised sticked rubbles" as the term for adhesive rubber feet on the bottom of electronics. Hope someone finds out what it is before I need one..
|
|
..BAD TO THE BONE..
