Sophomore Rider
Currently Offline
Posts: 201
Likes: 1
Joined: Feb 27, 2013 2:23:40 GMT -5
|
Post by CopperDeer on May 31, 2013 22:17:25 GMT -5
So long story short i put my 83cc bbk on a long cas e and swapped it onto my Tao Tao. So far were loving the ride on 12"s instead of 10"s. Anyways my problem is with the rear shock. I understand the preferred method is relocating the bracket but that doesn't interest me. I measured the long cases shock to be shorter but it was too rusted and old to use safely. The swing arms geometry is slighly off and i was wondering are there really shocks for these that are in shorter or adjustable height?
|
|
Freshman Rider
Currently Offline
Posts: 66
Likes: 0
Joined: May 24, 2013 11:00:12 GMT -5
|
Post by kingkaymo on May 31, 2013 22:26:28 GMT -5
im not familiar with taotao swaps, do you need a shorter shock for the long case to sit right? i have a pile of shocks i pull off chinese mopeds and four wheelers i might have something you can use but i dont know what you need so....
|
|
Sophomore Rider
Currently Offline
Posts: 201
Likes: 1
Joined: Feb 27, 2013 2:23:40 GMT -5
|
Post by CopperDeer on May 31, 2013 23:47:15 GMT -5
Let me get some pictures / measurements but i think a shorter shock would do it
|
|
