|
|
Post by millsc on May 23, 2013 18:59:35 GMT -5
Put the airsal kit on and 50/16 gears its quite fast maxes the speedo in short order its a great buy!  |
|
|
|
Post by larry001964 on May 23, 2013 19:07:57 GMT -5
Put the airsal kit on and 50/16 gears its quite fast maxes the speedo in short order its a great buy!  Congrats Millsc Never worked with Airsal, but heard lots of good things about them... How well do you think that setup would work with a stroker crank ? |
|
|
|
Post by millsc on May 23, 2013 19:19:16 GMT -5
im running the stock head and cam, just see its worth its a steal for 61 bucks
|
|
|
|
Post by millsc on May 23, 2013 19:20:27 GMT -5
I think you'd have to use an extra gasket for clearance with the stroker
|
|
|
|
Post by larry001964 on May 23, 2013 19:24:24 GMT -5
I think you'd have to use an extra gasket for clearance with the stroker Well you have to anyway, but the gearing is what im looking at, been thinking for a while that 17/49 puts too much stress on the variator and belts, was wondering about the 50/16 gearing... Any idea how much speed your getting ? |
|
|
|
Post by millsc on May 23, 2013 19:56:15 GMT -5
ill gps it after i put a few miles on it i only used one gasket all ive done is the airsal pipe and gears and its nearly as fast as my tapout scoot for far less money
|
|
|
|
Post by skuttadawg on May 23, 2013 21:21:05 GMT -5
How much is the PSI compression ? What is the carb setup ? Going to use the 39mm or 50mm head ?
|
|
|
|
Post by millsc on May 23, 2013 22:18:43 GMT -5
compression is 190 psi using the stock head and a 18mm carb for now
|
|
|
|
Post by millsc on May 23, 2013 22:22:38 GMT -5
gonna put in my buford big valve 39mm combustion chamber head maybe tomorrow the compression will go up to around 200 or so psi and a 24mm carb, but does run fast with stock head and stock carb
|
|
Sophomore Rider
Currently Offline
Posts: 217
Likes: 22
Joined: Mar 3, 2013 8:42:52 GMT -5
|
Post by buford1488 on May 24, 2013 7:00:11 GMT -5
believe it or not back in the earley  's i was milling the piston's like that. and was trying to pat it but did not have anough fund's. or any-body to invest..just like the safer barier wall's in nascar i thought of it one day in bumper car's. i was thinking about the wall obserbing the impact. but rusty beat me to it..o-well...lol...any-way great job mill...cant wait to hear about the big-valve.. remember the compression is gonna be very high......my valves dont leak...keep me informed.....buford |
|
's i was milling the piston's like that. and was trying to pat it but did not have anough fund's. or any-body to invest..just like the safer barier wall's in nascar i thought of it one day in bumper car's. i was thinking about the wall obserbing the impact. but rusty beat me to it..o-well...lol...any-way great job mill...cant wait to hear about the big-valve.. remember the compression is gonna be very high......my valves dont leak...keep me informed.....buford