New Rider
Currently Offline
Posts: 34
Likes: 0
Joined: Apr 16, 2013 12:07:25 GMT -5
|
Post by relaxinrob on Apr 16, 2013 12:11:09 GMT -5
139qmb engine, has run great for three seasons, put the battery in it, started right up, drove it 4-5 times and worked great, shut it off and went to start it the next day and it turns over but wont start. Cleaned the carb, but then noticed it had no spark, replaced the plug, replaced the coil, replaced the CDI, and still nothing........
HELP!!!!
|
|
Sophomore Rider
Currently Offline
Posts: 160
Likes: 0
Joined: Feb 27, 2013 22:58:57 GMT -5
|
Post by gy6girl on Apr 16, 2013 18:46:51 GMT -5
To help you get some help... Cleaned the carb, but then noticed it had no spark, replaced the plug, replaced the coil, replaced the CDI, and still nothing. Still no spark, or still no engine turning over? or both? |
|
|
|
Post by onewheeldrive on Apr 16, 2013 19:26:17 GMT -5
It's important to let us know whether you properly grounded the spark plug when checking it, and that you didn't accidentally hit your kill switch. Some scooters also have a side-stand kill switch, although I'm not sure what all ones do. That's worth checking. Other than what you've replaced, it could be a loose wire somewhere along that route, or even the switches---ignition or kill perhaps?  It could be stator/pickup related. |
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 16, 2013 22:10:31 GMT -5
To see if it is the ignition switch or kill switch that has gone bad and is preventing it from starting unplug the black and white wire from the CDI.
|
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Apr 16, 2013 22:51:36 GMT -5
|
Post by countcrackula on Apr 16, 2013 23:08:11 GMT -5
|
|
