New Rider
Currently Offline
Posts: 25 
Likes: 0
Joined: Oct 23, 2016 6:22:59 GMT -5
|
Carb Sealed
by: jeff01 - Dec 10, 2017 6:42:10 GMT -5
via mobile
Post by jeff01 on Dec 10, 2017 6:42:10 GMT -5
Any easy way to get screws out of sealed carb ? Why sealed ? Would like to rejet
|
|
|
|
Post by tvnacman on Dec 10, 2017 7:45:57 GMT -5
drill them out, sealed for epa purposes.
what engine size?
John
|
|
New Rider
Currently Offline
Posts: 25
Likes: 0
Joined: Oct 23, 2016 6:22:59 GMT -5
|
Carb Sealed
by: jeff01 - Dec 10, 2017 8:08:55 GMT -5
via mobile
Post by jeff01 on Dec 10, 2017 8:08:55 GMT -5
2017 taotao 150 qmj157 appreciate any help ?
|
|
|
|
Carb Sealed
by: cyborg55 - Dec 10, 2017 10:06:16 GMT -5
Post by cyborg55 on Dec 10, 2017 10:06:16 GMT -5
Why? It's an attempt at anti tamper so you can't rejet or modify,,, the gubment knows better than you and will tell you so whether you like it or not,,,even tho they can't balance a budget to save their miserable hides,,,john said it ,,,drill the heads off and get a set of needle nose vise grips and extract the shafts and replace with good quality hex head screws,,,and while you have the carb off remove the sheet metal cap that's pressed in the boss around the air/fuel mixture screw as well,,,
|
|
|
|
Carb Sealed
by: tortoise - Dec 10, 2017 11:04:49 GMT -5
Post by tortoise on Dec 10, 2017 11:04:49 GMT -5
way to get screws out of sealed carb Apparently too lazy to enter a few YouTube search terms . . perhaps yet another cannabis impaired slacker? |
|
|
|
Carb Sealed
by: lostforawhile - Dec 10, 2017 16:45:32 GMT -5
via mobile
Post by lostforawhile on Dec 10, 2017 16:45:32 GMT -5
You are better to get a good aftermarket carb,like a keihin, no anti tamper screws,plus the diaphram needle is adjustable,unlike many generic carbs
|
|
|
|
Carb Sealed
by: urbanmadness - Dec 21, 2017 14:11:10 GMT -5
Post by urbanmadness on Dec 21, 2017 14:11:10 GMT -5
What he said. Carbs are cheap for decent ones; go with a stock size tho... then re-jet to what is appropriate.
|
|
|
|
Post by tvnacman on Dec 22, 2017 5:01:29 GMT -5
|
|
|
|
Post by spandi on Dec 22, 2017 8:38:58 GMT -5
Try again. The link appears to be just circling right back here. (I find that typing in my own title clears this up)  |
|
