|
|
Beer!
by: jerseyboy - Jul 8, 2014 7:30:59 GMT -5
Post by jerseyboy on Jul 8, 2014 7:30:59 GMT -5
We also have a couple small brew pubs,,one up in Poconos and one in Milford NJ,,they make some great hoppy beer I always enjoy a pint once in a while with a plate of hot wings,fish and chips,or a steak like you mentioned  |
|
|
|
Post by jerseyboy on Jul 7, 2014 21:08:51 GMT -5
Yeah,, I thought the air/fuel was just for the idle and maybe how the motor takes the fuel off idle,,the top is the main jet..I remember having an old Triumph with a clogged pilot and the motor ran like crap throughout the entire power band so you never know.. The air/fuel mixture is not for the idle. There is a seperate screw for that on the opposite side of the carb. The idle screw controls how far open the air intake stays when youre not using the throttle at all. More air = higher RPMS, so you can adjust the idle screw to change how many RPMS you idle at. The air/fuel mixture screw contains how much gasoline gets mixed with the air as it comes through the carb. I didnt mean it was for the idle SPEED,,I meant its for controlling fuel/air mix at around idle and slightly above,,sorry for being confusing... |
|
|
|
Post by jerseyboy on Jul 7, 2014 19:40:27 GMT -5
Yeah,,
I thought the air/fuel was just for the idle and maybe how the motor takes the fuel off idle,,the top is the main jet..I remember having an old Triumph with a clogged pilot and the motor ran like crap throughout the entire power band so you never know..
|
|
|
|
Post by jerseyboy on Jul 7, 2014 19:17:07 GMT -5
Yeah there are some good eBay dealers , I get my gates belts from a place in Georgia and they always get here in two days . I ordered a gates Kevlar 842 from napa before and it looked like it was from the 1940's , lol . It looked wore and had an old packaging I've never seen . To be honest with you,,I think I have been running fake gates belts,,cause the package said made in china,,they seem to hold up good so far?? |
|
|
|
Post by jerseyboy on Jul 7, 2014 19:06:28 GMT -5
The blue springs are 1k with ncy that is the three rpm clutch springs . I bought the 3rd generation clutch assembly from scooter elements about 3 yrs ago and my 1500 clutch springs were orange . Now I see all most are yellow . I think the black main is 1500 rpm ? Also my old stock rpm springs fit my ncy clutch . They each had the same amount of coils . Thats cool bro,,so I will get the blue NYC clutch and wont have to worry about springs,,I saw the bell for $39 free ship also,,thanks man!! Sorry for the derail on the thread,,I think this guy is running lean,,but he said his old plug was black,,too much fuel will cause a top bog also...do you see any black smoke coming out of the pipe when you nail it from an idle on the center stand?? |
|
|
|
Post by jerseyboy on Jul 7, 2014 18:46:52 GMT -5
Wonder what size main jet you have in it?
I bet its super lean from factory with a 103-105...might be happier with a 110-115.What does the plug look like,,really light colored?
|
|
|
|
Post by jerseyboy on Jul 7, 2014 18:43:01 GMT -5
Mine is a 2006 and when I bought it " used " there were no emissions crap at all on it . Wow!! That thing is almost a classic lol..is it the original motor block and crank? |
|
|
|
Post by jerseyboy on Jul 7, 2014 18:35:19 GMT -5
I bought my gears off that guy,,they came out of the NYC package so i thought they might be fake,,he said they are the biggest distributor of NYC in the US so why would he sell a fake,,I was also looking at that clutch today,,but I dont like the blue springs,,and alley said NYC takes their own spring so I would have to get the black 1K springs also...and the NYC bell I assume..If NYC makes 1K springs I will get that clutch and the NYC bell,,I like their stuff...
|
|
|
|
Post by jerseyboy on Jul 7, 2014 18:29:55 GMT -5
Hahaha,,
I got both an orange and blue from ebay,,they work good under power but make my idle rough and hard startin from the timing change,,I found a great black one on ebay last year,,it has rev limit bypass and is slightly advanced but my scoot starts great and runs smooth,,i cant find the CDI anymore,,should have bought 3 of them...guess my next one will be from John here...he has the good ones too..
|
|
|
|
Post by jerseyboy on Jul 7, 2014 18:19:36 GMT -5
Im going to get this one,, I like the stock springs,,think they are 1K or 1.5,,my over all goal is to get my RPM down and cruising torque up,,man these gears really helped,,I can loaf along at 40 MPH taching 5K..lmao!!! This seller seems pretty good so far,,100% positive feedback,,and the parts look decent,,gonna try him for a while,,but I do need Walter to get in gear for my BBK CLUTCH.. www.ebay.com/itm/161051770045?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AITBELL.. www.ebay.com/itm/151061710397?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT |
|
|
|
Post by jerseyboy on Jul 7, 2014 14:01:48 GMT -5
HD should have had it designed so it would at least leak on the chain |
|
|
|
Post by jerseyboy on Jul 7, 2014 11:17:09 GMT -5
Just like that ford f-150 with the HD package..lmao!!!
|
|
|
|
Post by jerseyboy on Jul 7, 2014 9:45:24 GMT -5
Yeah,,
I was looking at different ones on ebay,,I may just wait till Walter gets his butt in gear with the new scooter parts store..that way i can get my BBK and clutch all at once from him..
Thanks again for the info!
|
|
|
|
Post by jerseyboy on Jul 7, 2014 7:44:02 GMT -5
Jersey, When you do get a Clutch get one with more pad material, here is the one I got, its the NCY clutch and I am pulling 350lbs trike plus my 180lbs. Alleyoop  Thanks Alley! Will that slide right inside my stock bell or do I need to upgrade the bell? The one thats on there now doesn't look too bad,,its got the extra band of steel wrapped around the outside so it wont warp as fast... |
|
|
|
Post by jerseyboy on Jul 7, 2014 7:41:20 GMT -5
What are you talking about? The Japanese have many(most) of the Cell Phone made for them in China now.  All my cell phones and computers are made in china... |
|
