|
|
Post by devo344a on May 28, 2013 11:05:37 GMT -5
Mine was messed up and the spacer was cracked I took out the spacer and used the red silicone and a Q-tip I always use them better than getting it on you but you can get into places you need but put the silicoe on bolted the carb on let it set for awhile and no more problem
|
|
|
|
Post by devo344a on May 27, 2013 15:07:27 GMT -5
I did away with my auto enrichener A penny fits in the hole so I put the first penny in and put silicone on it around the sides put another 2 pennys in then one more and siliconed it then put the clamp that holds down the enrichner down back on it will hold the pennys in just perfect mine runs great
|
|
|
|
Post by devo344a on May 27, 2013 8:20:33 GMT -5
Cooler air is denser and will make any engine run better
|
|
|
|
Post by devo344a on May 26, 2013 12:02:08 GMT -5
I use a Brinks cable and pad lock My neighbor had a factory alarm and it was messed up it would start in the middle of the nite and run for hours it just started anytime it felt like it we put a battery kill switch to get it to stop
|
|
|
|
Post by devo344a on May 26, 2013 11:58:40 GMT -5
breakin 10/30or40 regular oil the cheapest I can get.After breakin castrol 10/30 or 40 synthetic
|
|
|
|
Post by devo344a on May 26, 2013 11:52:42 GMT -5
I would like to say thank you to all who have served Thank you very much
|
|
|
|
Post by devo344a on May 25, 2013 12:19:26 GMT -5
I have the blue cdi that advances it was a notacble differance. From the stock to the orange I didnt notice any thing.
I got my blue one at chinesewholsaleparts.com they run a sale on certin things at the top of the page everyday got mine for $9.99 they are a little slow but if you have the time its worth it
|
|
|
|
oops!
by: devo344a - May 25, 2013 10:07:26 GMT -5
Post by devo344a on May 25, 2013 10:07:26 GMT -5
I did the same thing they should tell you there are different ones
|
|
|
|
Post by devo344a on May 25, 2013 10:04:22 GMT -5
Rock theres no play up and down and the grease has been changed 2 times. nothing is ratling loose I had the cvt cover off and just noticed the play
|
|
|
|
Post by devo344a on May 24, 2013 17:07:07 GMT -5
OK Thanks alleyoop just what I wanted to hear
|
|
|
|
Post by devo344a on May 24, 2013 15:50:11 GMT -5
I really beleave it would have to be death Ive been through alot Blood clots in legs Stints in aorita but thats why I ride the scoot to get around and see alot of differerant things and its cheap on fuel  |
|
|
|
Post by devo344a on May 24, 2013 15:33:24 GMT -5
Someone must know something about this dont tell me I stumped everyone
|
|
|
|
Post by devo344a on May 24, 2013 9:18:38 GMT -5
When on the stand with the cvt cover off the rear wheel touching the ground you can move the clutch bell back and forth about 1/4 in each way its in the gears can you tighten them or shim them tighter?
When riding it howels a little the reason for checking it
|
|
|
|
Post by devo344a on May 24, 2013 9:04:23 GMT -5
I know what your going threw so sorry your in our prayers
|
|
|
|
Post by devo344a on May 24, 2013 8:48:28 GMT -5
Wish there was more used scoots around here Lucky if there are 4or 5 running around let alone any used ones
|
|
