|
|
Post by devo344a on May 30, 2013 18:08:32 GMT -5
I dont use anything but the valve cover gasket no sealer
|
|
|
|
Help?
by: devo344a - May 30, 2013 12:47:55 GMT -5
Post by devo344a on May 30, 2013 12:47:55 GMT -5
there are lights that come on when you turn the key on the light in the front the rear light and the light that lights up the instrument panel they come on as long as the key is on
|
|
|
|
Post by devo344a on May 30, 2013 12:16:40 GMT -5
happy-B-day
|
|
|
|
Post by devo344a on May 30, 2013 12:16:14 GMT -5
Happy-B-Day
|
|
|
|
Post by devo344a on May 29, 2013 12:56:47 GMT -5
I have close ones almost every day we have alot of thick gravel in the rv park and it really keeps you on your toes not to hit the ground.
Glad your allrite I saw a pic on here weher someone went down and hit palms first made me start wearing leather gloves
|
|
|
|
Post by devo344a on May 29, 2013 12:52:08 GMT -5
They have alot of good deals I have bought alot of stuff from them. I have some LED light strips coming should be here friday
|
|
|
|
Post by devo344a on May 28, 2013 23:28:11 GMT -5
I use 10/30 or 10/40 after breakin I go to syntic 10/40 castorol
|
|
|
|
Post by devo344a on May 28, 2013 23:25:36 GMT -5
Very Informitive I like it  |
|
|
|
Post by devo344a on May 28, 2013 20:23:16 GMT -5
The way it looks like to me the temp doesnt have any thing much to do with it. It comes on when it gets voltage and doesnt shut off.
its not like a choke in a car the enrichener lets gas in while cold then the enricher extends the needle to shut off the extra gas and it just keeps heating the gel in the enrichner till you shut it off and the gel cools then it all happens again
|
|
|
|
Post by devo344a on May 28, 2013 18:28:14 GMT -5
the enrichener starts to work only when the scoot is running it gets power from the voltage regulator it has a gel in it and it heats up pushing the needle out and shuts the fuel off.
you can check it by taking it out leaving the wires connected put your finger over the hole where the enrichner was and start it after a few minutes it will start to extend it will extend approx 1/4in
Hope this helps
|
|
|
|
Post by devo344a on May 28, 2013 18:20:50 GMT -5
they are sealed bearings
|
|
|
|
Post by devo344a on May 28, 2013 14:52:16 GMT -5
Im in NM and run either never noticed a differance
|
|
|
|
Post by devo344a on May 28, 2013 14:50:12 GMT -5
kinda sounds like a vacum leak Check around the intake the rubber cracks and the gaskets theres a plastic spacer between the intake and the head. If you have it running and spray some either or carb cleaner around that area and the engine revs up theres a leak
|
|
|
|
Post by devo344a on May 28, 2013 14:44:58 GMT -5
Were not required to have it here in NM but I called and its only $  .00 a year for full coverage |
|
|
|
Post by devo344a on May 28, 2013 12:31:44 GMT -5
The closest ive found to clear is kinda clear yellow scrappydog has it
|
|
.00 a year for full coverage