New Rider
Currently Offline
Posts: 3 
Likes: 0
Joined: Oct 29, 2014 15:33:44 GMT -5
|
Post by razor2014 on Oct 29, 2014 16:53:22 GMT -5
Another thing i found is the I had the brake handles tie wrap and the rear light was on, when i removed the tie wraps the rear brake light never went out.
|
|
New Rider
Currently Offline
Posts: 3
Likes: 0
Joined: Oct 29, 2014 15:33:44 GMT -5
|
Post by razor2014 on Oct 29, 2014 16:51:05 GMT -5
So i resolder the push button switch. With the starter solenoid wires unplug. the switch works, when i plug the connection back together at the solenoid, the switch is shorted so i unplugged it and check the plug connection off the solenoid and the two wires are shorted together, i suppose this isn't suppose to be the case? Does this mean the starter solenoid is bad?
|
|
New Rider
Currently Offline
Posts: 3
Likes: 0
Joined: Oct 29, 2014 15:33:44 GMT -5
|
Post by razor2014 on Oct 29, 2014 15:43:00 GMT -5
Father in Law has a milan 150 scooter. We pulled carb and cleaned. Scooter will starter with the remote start, but it will not start with the push button. The scooter will not start if the on/off switch is off. If you can point me in the troubleshooting i would appreciate it. I can read a schematic and mechanically inclined.
|
|
