|
|
Post by cyborg on Jul 7, 2015 8:25:33 GMT -5
sounds like the valves need to be adjusted,,,,you sure it's a 50cc?  |
|
|
|
Post by cyborg on Jul 6, 2015 17:33:21 GMT -5
great score!!!!! happy trails!!!!,,,couple hunsters more and a couple three hours and you gots a runner!!!!,,,,just got a barn find myself,,,an ssr 150,,,, one franken bike commin up!!!!!!!!!!!!
|
|
|
|
Post by cyborg on Jul 3, 2015 8:52:45 GMT -5
i agree with the fact that the scoot is powdered toast,,,,another one is in order,,,get well and get back to ridin,,,,,
|
|
|
|
Post by cyborg on Jul 2, 2015 8:13:47 GMT -5
i agree do the valves,,once they "seat" or wear into the seat they are actually receeding into the head exposing more valve stem,,,making them" longer"so the lash gap goes away,,check your gas cap you may have a venting problem,,,run it and when it stalls quickly remove the fill cap if you hear air rush into the tank ,,,,bingo,,,,i would go over all the electrical connections also including all ignition terminations starting at the cdi trigger by the flywheel,and i would also check the intake manifold and carb mounting bolts and nuts
|
|
|
|
Post by cyborg on Jul 1, 2015 20:12:10 GMT -5
You have spark,,,on a fairly recent rebuild,,,I'd say you have a fuel delivery problem
|
|
|
|
Post by cyborg on Jun 29, 2015 17:12:21 GMT -5
i would have said valves myself,,,and running jets that turn up white plug is not good,,,,if you change carbs get one with an accelerator pump,,,i use mikuni myself but there's a few out there that will fit the bill
|
|
|
|
Post by cyborg on Jun 28, 2015 23:25:51 GMT -5
I would think the carb jets are still dirty,,and I would check the carb diaphragm for holes or cracks,,,,,,after all it is 10 years old
|
|
|
|
Post by cyborg on Jun 28, 2015 9:35:55 GMT -5
nice work,,,looking very nice!!!!
|
|
|
|
Post by cyborg on Jun 28, 2015 9:34:14 GMT -5
underinflation can cause this situation also
|
|
|
|
Post by cyborg on Jun 28, 2015 9:32:49 GMT -5
as far as the brakes go i'd say you are winding up the cable,,you need to hold the metal tip then adjust,,,,the light situation may be caused by any number of things,,,i think you are correct tho with the ground,,check all the grounds to frame connections
|
|
|
|
Post by cyborg on Jun 27, 2015 23:08:50 GMT -5
Welcome aboard!!!!!!
|
|
|
|
Post by cyborg on Jun 25, 2015 15:07:16 GMT -5
so what are you riding now?
|
|
|
|
Post by cyborg on Jun 25, 2015 15:03:36 GMT -5
haunt ebay
|
|
|
|
Post by cyborg on Jun 24, 2015 0:02:49 GMT -5
Small shim under the seat striker ,,, bam! Nappy time
|
|
|
|
Post by cyborg on Jun 21, 2015 14:42:19 GMT -5
Try a thin shim under the seat latch to give it more room so it will close over the extra thickness
|
|
