|
|
Hoca 54 mm
by: teddy554 - Apr 11, 2013 0:16:08 GMT -5
Post by teddy554 on Apr 11, 2013 0:16:08 GMT -5
|
|
|
|
Post by teddy554 on Apr 11, 2013 0:09:29 GMT -5
|
|
|
|
Post by teddy554 on Apr 10, 2013 21:29:18 GMT -5
i just meant chinese 150 not the the said model you where asking about
|
|
|
|
Post by teddy554 on Apr 10, 2013 14:17:26 GMT -5
Also on my cpi i run the tecingas rs2 with it only mounted to the bottom pipe is 2.5 years old with no issues
|
|
|
|
Post by teddy554 on Apr 10, 2013 14:10:57 GMT -5
You call it crap and ask wither you should buy it, but you can buy the 150 new for 700-900
|
|
|
|
Post by teddy554 on Apr 10, 2013 12:06:52 GMT -5
does it have disc brakes
|
|
|
|
Post by teddy554 on Apr 10, 2013 12:06:22 GMT -5
if you buy it and ever get tired of it , i will buy the rims  |
|
|
|
Post by teddy554 on Apr 10, 2013 7:26:57 GMT -5
welcome
|
|
|
|
Post by teddy554 on Apr 10, 2013 7:08:13 GMT -5
you dont have a usb to phone cord you can connect the phone to the computer like that then go to the dcim folder then camera folderor you can download the photobucket app picasa app and upload straight to you account  |
|
|
|
Post by teddy554 on Apr 10, 2013 6:13:03 GMT -5
wiscomton
mine was a aftermarket stage 6 bearing but it was in there for a minute
domindart
Yeah that was the culprit
|
|
|
|
Post by teddy554 on Apr 9, 2013 21:11:38 GMT -5
i used vise-grip on mine but you can also cut a slot with a dremal like tool and use a flat head screw driver or a bolt extractor  |
|
|
|
Post by teddy554 on Apr 9, 2013 21:07:51 GMT -5
|
|
|
|
Post by teddy554 on Apr 9, 2013 20:14:39 GMT -5
Clean the carb lately or change the spark plug
|
|
|
|
Post by teddy554 on Apr 8, 2013 8:27:16 GMT -5
I still have not figured that out  |
|
|
|
Post by teddy554 on Apr 7, 2013 22:56:11 GMT -5
clips are fine the were still in the piston grove it was the bearing in the wrist pin, yea the bearing just came out and chewed everything up, has for the motor the stock crank has over 10000 miles on it so i plan on a ground up rebuild on it but like skuttadog said i could slap another bbk on it and it would be fine but while its off the scooter and apart i might as put a new crank in now then later, i probably put a naruku hpc crank but that later down the road
|
|
