New Rider
Currently Offline
Posts: 7 
Likes: 0
Joined: Jul 14, 2016 16:05:09 GMT -5
|
Post by nalasha79 on Sept 19, 2016 21:52:45 GMT -5
Thanks for the link! I am going to replace the plug connecting end of the starter coil now.
|
|
New Rider
Currently Offline
Posts: 2
Likes: 0
Joined: Sept 20, 2016 0:58:35 GMT -5
|
Post by bfo321 on Sept 20, 2016 1:22:50 GMT -5
I went through several spark plug caps. Most had the the hard plastic break after a few months, one broke the clip, last one just kept falling off. Permanent fix that has held up for over a year was to take an 8mm car plug wire , cut to length, whittle down diameter at cut end so it'll fit in the coil. get a screw on tip for the plug, screw it on plug. I mashed it slightly so there'de be no chance of unscrewing off the plug . Reinstall the grommet that seals the plug hole in the shroud after trimming it to fit over the plug boot on the wire.
|
|
|
|
Post by JerryScript on Sept 30, 2016 2:18:09 GMT -5
I suggest everyone switch to metallic plug caps, something like this:  |
|
