|
Post by lain on Aug 14, 2015 18:47:08 GMT -5
Ah yeah I guess I did misunderstand, but I think I am still not understanding exactly. You say it was "hot seized" before, but it still ran? A seize means... well simply what seize means; stop, halt, no more movement, stuck in place. My guess is it was either tuned too lean before and the new bbk with new jets being a different engine now resolved the issue only because the parts that were suffering and the parts that caused it are now gone. As long as it is not running hot anymore, that is the important thing.
How close is your exhaust from the intake? I don't understand why you are trying to move the heat. When the engine is pumping it pushes the heat down the exhaust pipe and into the muffler where it travels through some fancy tubing and baffles and exits out into the air. Maybe you have one of those exhaust tubes that also have a tube on it that is supposed to recycle the exhaust air? I had one of those a long time ago and just cut it off with a hacksaw and patched the hole so it would be a normal tube that goes only to the muffler.
|
|
|
Post by florida on Aug 21, 2015 20:11:15 GMT -5
The Gmw or Wolf brand 50cc scooter has 12" wheels.
On Fl streets, the only thing to avoid is the dreaded man holes.
|
|
|
Post by florida on Sept 30, 2015 1:21:50 GMT -5
Recently I've installed: - DLH variator. -I've got both 1000rpm and 1500rpm version clutch springs. I havent installed them yet. - 7.5 g roller weights. - new belt - installed new rear shock. Same adjustable collar type as stock but 1 1/4 in. longer. - Used but very good condition OEM front forks. Original fork was ruined when fender tab broke off exposing the forks internals. -New front brake master lever. - New rear drum brake shoes. -5w Xenon front lights. - 12w Xenon front lights. - 35w H4 headlights.
- new kickstand and spring. -new center-stand. - all new bolts, nuts, washers and clips. A few are stainless. Ace Hardware has a bigger selection of metric fasteners than Lowes and HD. - I've also made an effort at waterproofing my gy6 wiring harness from Floridas Tropical Storms. Ive used a bicycle inner tube, cut into lengths and then one end zip-tied above the male connect. The loose end slips over the female plug-in effectively sealing the deal!
**
**Ive heard rumors of wine bottles being used to protect a 38mm filter from the elements. Is this true?
|
|
|
Post by florida on Oct 2, 2015 12:38:30 GMT -5
New shock from GMW retailer in my City. Its 11 1/4 in compared to the stock 10 1/4 in. I didnt feel that the different geometry has any noticable effect on my scooters handling.
|
|
|
Post by florida on Oct 5, 2015 19:06:26 GMT -5
Update:
I have new numbers for my build: - where it was once 15mph uphill I now go 35mph. - my top speed has increased 16 mph from 39 mph after rebuild to a top speed of approaching ( untested on gps ) 55mph after replacing variator, installing heavier weights and a new belt.
Any other Gmw owners, and Gy6 enthusiasts pm me. Id like to attend a group ride. I reside in pinellas county Central Florida.
|
|