New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Apr 4, 2013 17:13:31 GMT -5
|
Post by speed0meter on Jul 1, 2013 18:15:50 GMT -5
What in your opinion would you expect after installing red clutch springs 2k (red) torque spring & 14g sliders? Only other mod is filter is on the carb & I weight around 130
|
|
|
|
Post by tvnacman on Jul 1, 2013 18:32:25 GMT -5
what engine size ?
John
|
|
New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Apr 4, 2013 17:13:31 GMT -5
|
Post by speed0meter on Jul 1, 2013 22:16:49 GMT -5
150
|
|
|
|
Post by oldchopperguy on Jul 1, 2013 22:25:23 GMT -5
SpeedOmeter,
I've just been messing with my own variator, and am about to change from rollers to sliders myself. They show definite advantages over rollers. From my experience, 14-grams would be a little too heavy for me, but I weigh 235. My gut feeling is that at your weight, of 130, you might just be "on the money"!
I wouldn't be surprised if you get nice, low-rpm cruising, and still have good acceleration AND great top speed.
Hope I'm right!
Ride safe!
Leo in Texas
|
|
|
|
Post by devo344a on Jul 1, 2013 23:30:12 GMT -5
Im still a little confused about the rollers or sliders..
Im still a litte confused about the heaver ones does it sling it out faster or slower Im needing to have it go out further and slower so I can build up a little rpms then shift I believe it has 7grm ones in it now, I would like to raise the rpms up some before it shifts
Let me know if this is the weigh it goes or not dont want to spend to much on just replace test then replace again
Please help me if you can
|
|
|
|
Post by devo344a on Jul 1, 2013 23:34:56 GMT -5
Hey Leo whwere is grapevine TX at?? Im in deming nm Im only about 20 miles from the border and saw where you were at and want to see how far apart we are Maybe if its not way to far we might be able to set something up to meet
Thanks Tim
|
|
|
|
Post by JR on Jul 2, 2013 0:42:02 GMT -5
Devo Grapevine is a northern suburb of Dallas.
|
|
|
|
Post by oldchopperguy on Jul 2, 2013 1:36:20 GMT -5
Devo Grapevine is a northern suburb of Dallas. Grapevine is at the north end of D/FW Airport (Irving is at the south end)... It's a BIG airport! LOL! I live LITERALLY at the west end of the most east/west runway. Leo (SO glad that modern planes no longer use flush-out-the-bottom toilets...) in Texas |
|
New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Apr 4, 2013 17:13:31 GMT -5
|
Post by speed0meter on Jul 9, 2013 0:27:27 GMT -5
Update-
Got 14g sliders in with red springs clutch spring.
Rides amazing.
Installing performance exhaust 2m. Now am I going to have to re-jet carb?
|
|
New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Apr 4, 2013 17:13:31 GMT -5
|
Post by speed0meter on Jul 10, 2013 23:47:48 GMT -5
Got all my work done for now & must say I'm pleased with these results. With springs & sliders exhaust it's like a whole new bike. Next step is paint & body mod.
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 21, 2024 23:45:33 GMT -5
|
Post by Deleted on Jul 11, 2013 6:12:41 GMT -5
It takes more energy to throw out heavier rollers or sliders so its slower, yielding slower acceleration.
|
|
New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Apr 4, 2013 17:13:31 GMT -5
|
Post by speed0meter on Jul 11, 2013 10:10:51 GMT -5
Actually it's great all around. Take off is quick & I can cruise with traffic and what I was mostly lookin 4 was the acceleration in the mid area. Before it really wasn't there but now it's very responsive. Got a bit of backfiring going on since the exhaust install but I'm lovin it.
|
|
New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Apr 4, 2013 17:13:31 GMT -5
|
Post by speed0meter on Jul 11, 2013 10:13:02 GMT -5
Wanted to get 1 of the "A" cams but I've heard or read probs with installing 1 of these on a stock head? Anyone done this with no probs on stock head?
|
|
|
|
Post by ltdhpp on Jul 11, 2013 17:45:02 GMT -5
Installing performance exhaust 2m. Now am I going to have to re-jet carb? Got a bit of backfiring going on since the exhaust install but I'm lovin it. yes, and it will probably get even faster too. backfiring isn't good. |
|
New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Apr 4, 2013 17:13:31 GMT -5
|
Post by speed0meter on Jul 14, 2013 3:00:45 GMT -5
Ok, since this falls into what work I've done so far I fig I'd just keep it under this post. So now the goods or bads?
Yesterday I was riding & with new exhaust on its a bit louder but I noticed when I took off real slow there was this sorta grinding catching feeling coming from the rear but only @ very slow speed. Then it goes away & don't hear or feel it on the dwn shift. Gunna take it apart 2m. It runs fine tho just this feel & noise. Anyone experience this?
|
|
