Post by tacticaltaco on Feb 11, 2017 17:28:55 GMT -5
I have a 2008 Lance Venice 150 and randomly while out the electric start had stopped working. The starter would spin but would not engage the flywheel. Naturally I went down the common problems and replaced various parts to no avail.
I replaced the Starter and starter solenoid. The starter still does not engage the flywheel and it does not turn the cylinder over. When looking at the flywheel it did not look overly stripped or teeth did not look bad. The starter does spin i checked it while out of the case. I then replaced the solenoid just to make sure (only 5$) and that didnt help either.
The battery was replaced in the last 6 months and turns over very well.
I am stumped.....anyone have some insight on what this could be?
Thanks
I replaced the Starter and starter solenoid. The starter still does not engage the flywheel and it does not turn the cylinder over. When looking at the flywheel it did not look overly stripped or teeth did not look bad. The starter does spin i checked it while out of the case. I then replaced the solenoid just to make sure (only 5$) and that didnt help either.
The battery was replaced in the last 6 months and turns over very well.
I am stumped.....anyone have some insight on what this could be?
Thanks
