New Rider
Currently Offline
Posts: 14
Likes: 1
Joined: Sept 7, 2013 16:32:24 GMT -5
|
Post by mspctech2000 on May 20, 2015 18:45:09 GMT -5
Hi all,
I'm in desperate need of a voltage regulator for my 2012 efi tbx 260. 3 plugs with 6 wires. Bms is back ordered 3-4 weeks and i can't find it anywhere. Took it on vacation and now can't ride. I found a place that works on them but we can't get the part. Any suggestions would be greatly appreciated. I would pay to have it fedexed if i can find it.
Thanks...
|
|
|
|
Post by dmartin95 on May 20, 2015 19:02:23 GMT -5
BMS Motorsports parts website appears to have them in stock - LINK |
|
|
|
Post by cyborg on May 20, 2015 21:11:01 GMT -5
That's a bone right there
|
|
New Rider
Currently Offline
Posts: 14
Likes: 1
Joined: Sept 7, 2013 16:32:24 GMT -5
|
Post by mspctech2000 on May 21, 2015 4:23:26 GMT -5
Thanks, but that is the 5 wire. I called them for the 6 wire and that's when they told me it was back ordered.
|
|
|
|
Post by tvnacman on May 21, 2015 4:34:20 GMT -5
I have a 7 pin that will work it has a black wire extra. If you interested have the tech at the shop call me and I can talk him through it very simple. Your welcome to call also .
John
|
|
|
|
Post by dmartin95 on May 21, 2015 12:06:57 GMT -5
Thanks, but that is the 5 wire. I called them for the 6 wire and that's when they told me it was back ordered. That is not a five wire R/R. It's a 6 wire, 3 yellows, one red, one white and one green. However, if you called BMS motorsports and they don't have it in stock, it's a moot point... But they're website shows it as in stock. Here's a better pic with all 6 wires:  |
|
|
|
Post by dmartin95 on May 21, 2015 12:12:13 GMT -5
I have a 7 pin that will work it has a black wire extra. If you interested have the tech at the shop call me and I can talk him through it very simple. Your welcome to call also . John The 7 Pin has different plugs/connectors... It could be re-wired to work but she would need an adapter harness or it would be hacked up.... She has a sweet 260 TBX, I doubt she wants wires spliced together.  That's her plugs |
|
|
|
Post by spandi on May 21, 2015 12:41:25 GMT -5
|
|
|
|
Post by tvnacman on May 21, 2015 16:04:40 GMT -5
I have a 7 pin that will work it has a black wire extra. If you interested have the tech at the shop call me and I can talk him through it very simple. Your welcome to call also . John The 7 Pin has different plugs/connectors... It could be re-wired to work but she would need an adapter harness or it would be hacked up.... She has a sweet 260 TBX, I doubt she wants wires spliced together. That's her plugs Yes the plugs are different, but if she can not find the correct replacement. This is a solution provided that it will work. I'm sure with some work it will work. John |
|
|
|
Post by dmartin95 on May 21, 2015 18:25:21 GMT -5
The 7 Pin has different plugs/connectors... It could be re-wired to work but she would need an adapter harness or it would be hacked up.... She has a sweet 260 TBX, I doubt she wants wires spliced together. That's her plugs Yes the plugs are different, but if she can not find the correct replacement. This is a solution provided that it will work. I'm sure with some work it will work. John John, yep, if you have adapter plugs it would work even better than her stock R/R. The 7-Pin R/R is very robust.. One of the best in my opinion. The extra black wire in the 7 pin harness is a voltage sense wire that is wired/tapped into the "ignition on" wire located on the back of the key switch circuit. Any good mechanic should be able to this swap with their eyes closed and with the proper adapter, it would be plug 'n play and professional. |
|
|
|
Post by tvnacman on May 21, 2015 18:50:09 GMT -5
dmartin95 Adaptors are nice good splicing works well too.
|
|
New Rider
Currently Offline
Posts: 14
Likes: 1
Joined: Sept 7, 2013 16:32:24 GMT -5
|
Post by mspctech2000 on May 27, 2015 19:35:14 GMT -5
Thanks for all of your input. On the BMS site the pic shows the one that I need, but when I called BMS to order it, we discovered that they have the wrong pic for the one that they have in stock. If you look at the description on their page, it indicates that it is indeed a 5 wire and the one that I need is a 6 wire. My last resort was to contact Xingyue in China directly...LOL I contacted them before and they got back to me, so I'll keep you posted. If not, I may be contacting you tvnacman, because I refuse to be down all summer !
Thanks again...
|
|
|
|
Post by tvnacman on May 27, 2015 20:15:36 GMT -5
Thanks for all of your input. On the BMS site the pic shows the one that I need, but when I called BMS to order it, we discovered that they have the wrong pic for the one that they have in stock. If you look at the description on their page, it indicates that it is indeed a 5 wire and the one that I need is a 6 wire. My last resort was to contact Xingyue in China directly...LOL I contacted them before and they got back to me, so I'll keep you posted. If not, I may be contacting you tvnacman, because I refuse to be down all summer ! Thanks again... I'm sure we can get this squared away and quick. If the manufacturer in China gets back to you thats even better. John |
|
New Rider
Currently Offline
Posts: 4 
Likes: 0
Joined: May 28, 2015 21:09:24 GMT -5
|
Post by bigfootj33 on May 29, 2015 17:29:37 GMT -5
|
|
|
|
Post by dmartin95 on May 29, 2015 19:05:25 GMT -5
Bigfoot, is your BMS 260 TBX fuel injected or carburetor?
|
|
