New Rider
Currently Offline
Posts: 46
Likes: 0
Joined: May 1, 2013 17:57:04 GMT -5
|
Post by robert777 on Apr 21, 2015 12:59:18 GMT -5
Scoot slipped in a turn on a foggy night, whacked the turn signal, now it doesn't work right. Mostly dead, occasionally will work when bounced around just right. must be a loose connection, took off cover and changed bulb and made sure connections in there were ok, where else to look and how to get to them on a Kymco 125? thx!!
|
|
|
|
Post by tvnacman on Apr 22, 2015 15:18:55 GMT -5
is it the front rear or both?
John
|
|
New Rider
Currently Offline
Posts: 46
Likes: 0
Joined: May 1, 2013 17:57:04 GMT -5
|
Post by robert777 on Apr 23, 2015 2:42:10 GMT -5
front left only... thx, R
|
|
|
|
Post by yelloscoot on Apr 26, 2015 11:48:24 GMT -5
Seeing that it is working intermittently, there may be a pinched wire somewhere along the line. Try removing the housing and trace it back. Look for any deformation in the wire. Or if you have a multi-meter, check for continuity. Either way, something is going to need to be taken apart. If you have a pic you can post, that might help...  |
|
|
|
Post by jerseyboy on Apr 26, 2015 14:48:56 GMT -5
When it doesnt work try wiggling the switch,,could be a bad or dirty contact in the switch also,,check all your grounds.
|
|
