New Rider
Currently Offline
Posts: 20 
Likes: 3
Joined: Apr 6, 2015 22:28:00 GMT -5
|
Post by wingsltd on Apr 17, 2015 14:29:01 GMT -5
Hey everybody! I'm having an issue where I ran over quite a few bumps in the road and my Tach/ Fuel level readouts are not working at all for my scoot.
Speedo/odo work fine.
Took apart the top peice and it lookes to be hooked up solid, but where should i go from there?
|
|
|
|
Post by dmartin95 on Apr 17, 2015 15:30:09 GMT -5
Hey everybody! I'm having an issue where I ran over quite a few bumps in the road and my Tach/ Fuel level readouts are not working at all for my scoot. Speedo/odo work fine. Took apart the top peice and it lookes to be hooked up solid, but where should i go from there? Locate a spot where they share a common connection and go from there... For instance, if they both get their power or ground from the same circuit, inspect that area.... Visual inspections will not cut it. You need a multi-meter with the ability to indicate continuity. |
|
New Rider
Currently Offline
Posts: 20
Likes: 3
Joined: Apr 6, 2015 22:28:00 GMT -5
|
Post by wingsltd on Apr 18, 2015 8:37:09 GMT -5
Okay, but I don't know how to use one
|
|
|
|
Post by JoeyBee on Apr 19, 2015 20:15:20 GMT -5
wingsltd Did you figure out the cluster issue? If not I can send photos of mine
|
|
New Rider
Currently Offline
Posts: 20
Likes: 3
Joined: Apr 6, 2015 22:28:00 GMT -5
|
Post by wingsltd on Apr 28, 2015 8:32:23 GMT -5
wingsltd Did you figure out the cluster issue? If not I can send photos of mine Actually I am fixing to take it apart right now..I've been trying to monitor gas by my odo but keep running out if there's traffic jams :/ |
|
New Rider
Currently Offline
Posts: 20
Likes: 3
Joined: Apr 6, 2015 22:28:00 GMT -5
|
Post by wingsltd on Apr 28, 2015 8:51:42 GMT -5
wingsltd Did you figure out the cluster issue? If not I can send photos of mine Actually I am fixing to take it apart right now..I've been trying to monitor gas by my odo but keep running out if there's traffic jams :/ After extensive wire hunting i found 4 that had been disconnected from all the bumps. Simply soldered them back together and viola!!!!! |
|
|
|
Post by geh3333 on Apr 28, 2015 9:15:19 GMT -5
Actually I am fixing to take it apart right now..I've been trying to monitor gas by my odo but keep running out if there's traffic jams :/ After extensive wire hunting i found 4 that had been disconnected from all the bumps. Simply soldered them back together and viola!!!!! Very good ! Isn't it nice when something actually goes right? |
|
New Rider
Currently Offline
Posts: 20
Likes: 3
Joined: Apr 6, 2015 22:28:00 GMT -5
|
Post by wingsltd on Apr 28, 2015 9:29:16 GMT -5
dmartin95, JoeyBee, geh3333Definitely, Thanks to everyone for the help. There's one 2 wire that's green/black that I assume would be for my oil temp gauge that's not connected to anything? My cluster only has fuel/tach/speed&odo. Was wondering if I can get a temp readout so I know when I start to overheat.
|
|
|
|
Post by JoeyBee on Apr 28, 2015 10:25:41 GMT -5
We don't have a tempature gauge. There are after-market gauges available for purchase.
|
|
|
|
Post by geh3333 on Apr 28, 2015 10:56:03 GMT -5
dmartin95, JoeyBee, geh3333Definitely, Thanks to everyone for the help. There's one 2 wire that's green/black that I assume would be for my oil temp gauge that's not connected to anything? My cluster only has fuel/tach/speed&odo. Was wondering if I can get a temp readout so I know when I start to overheat. You can just get one of the oil dipsticks that are temp gauges. That's what I have. Its nice to know what temps your at. You can catch a problem before it turns into a disaster ! |
|
