Post by dcustriker on Oct 14, 2014 11:12:53 GMT -5
Here is the videos of it running. Just notice that the first video was with me just going out and starting it up. You'll notice that AFTER this one, I put fuel directly into the carburetor. It takes awhile for the scooter to start up with fuel injected directly into the carb, so it seems like fuel is not in the lines or something which could confuse you. I think it is flooding the plug or something, but not sure.
This is the first start up. All I did was plug in the battery, removed gas cap, and started her up. (Above video)
This is the second video, after filling the carburetor 1/4 full. It acts like there is no fuel in the lines when I start it up this time, even though it initially started just fine earlier?
I'm probably going to replace the carburetor this weekend anyways since I noticed the screw heads had been cut off from the bottom of the carb. Replacement was only $24 on amazon and I'm going to change the jets to a 125 for the Uni Filter. Also putting on the Gates Powerlink belt, Naraku Adjustable CDI, Naraku Ignition coil as well.
This is the first start up. All I did was plug in the battery, removed gas cap, and started her up. (Above video)
This is the second video, after filling the carburetor 1/4 full. It acts like there is no fuel in the lines when I start it up this time, even though it initially started just fine earlier?
I'm probably going to replace the carburetor this weekend anyways since I noticed the screw heads had been cut off from the bottom of the carb. Replacement was only $24 on amazon and I'm going to change the jets to a 125 for the Uni Filter. Also putting on the Gates Powerlink belt, Naraku Adjustable CDI, Naraku Ignition coil as well.