|
|
Post by alleyoop on Apr 7, 2014 17:11:49 GMT -5
I have a question because it appears the motor is not turning over? When you do that is the crank turning? I did not hear the piston going up and down? If so then that big Starting Gear is not grabbing the crank to turn the crank. Because the way the starter is spinning the starter gear should be enough to get the motor to start.
Alleyoop
|
|
Freshman Rider
Currently Offline
Posts: 60 
Likes: 2
Joined: Apr 4, 2014 10:41:18 GMT -5
|
Post by gizmo67 on Apr 7, 2014 18:15:24 GMT -5
Before it would spin really slow, then it would stop and click, but now it makes that noise in the video and the crank shaft dies not move. I can tutn it by hand though, this is my first issue with this scooter i refuse to throw in the towel lol
|
|
Freshman Rider
Currently Offline
Posts: 60
Likes: 2
Joined: Apr 4, 2014 10:41:18 GMT -5
|
Post by gizmo67 on Apr 7, 2014 18:30:01 GMT -5
I know the video is not the best quality, but does it look like everything is in place? Like the gears matching up?
|
|
|
|
Post by alleyoop on Apr 7, 2014 18:45:29 GMT -5
That is what I thught the STARTER gear the big one that the BENDIX turns is not tight on the crank and is just rotating on the crank. So that take the round restricter Plate in front of it and I would bet you can turn that BIG gear with your hands and the crank will not turn. So if so you need to push that gear back some more tight on the crank.
Alleyoop
|
|
Freshman Rider
Currently Offline
Posts: 60
Likes: 2
Joined: Apr 4, 2014 10:41:18 GMT -5
|
Post by gizmo67 on Apr 7, 2014 18:49:03 GMT -5
So the big gear has to be align with the gears that connect to the starter motor?
|
|
|
|
Post by alleyoop on Apr 7, 2014 19:06:20 GMT -5
No I am afraid it is more involved that that. You have the 1E40QMB motor and it has a starter clutch behind the variator. The problem is the Starter clutch is NOT TURNING THE crank. So it appears you need a new starter clutch:
Here is a video of your cvt being taken apart and you will the the Starter CLutch behind the Variator.
Alleyoop
|
|
|
|
Post by alleyoop on Apr 7, 2014 19:19:59 GMT -5
|
|
Freshman Rider
Currently Offline
Posts: 60
Likes: 2
Joined: Apr 4, 2014 10:41:18 GMT -5
|
Post by gizmo67 on Apr 7, 2014 19:54:39 GMT -5
Theres no way to test it out just to change it? And is it just take out old one and place the new one in? I found a video of a ruckus sounding the same as mine, and they said the same thing you said about the bad starter clutch. So i will buy this and go from here thanks again. I will update on the process
|
|
|
|
Post by alleyoop on Apr 7, 2014 20:08:39 GMT -5
Yea, the clutch works off springs and after you take the old one off you can tear the old one apart and you will see how it works. It has some springs in it which is what goes bad. When it spins to turn the crank it locks then it releases after you let go of the start button and turns freely along with the crank. The same type Starter Clutchs are on the 150s and bigger scoots. Except your lucky yours is on the outside on the 150+ motors they are inside the CASE.
Alleyoop
|
|
|
|
Freshman Rider
Currently Offline
Posts: 60
Likes: 2
Joined: Apr 4, 2014 10:41:18 GMT -5
|
Post by gizmo67 on Apr 8, 2014 18:32:15 GMT -5
Should i still wing it and buy a new one?
|
|
|
|
Post by alleyoop on Apr 8, 2014 19:27:31 GMT -5
You can put it back together and try it but I think the springs are shot to weak to hold the clutch in the locked position to turn the motor over. If it still won't hold the lock position then just get a new starter clutch.
Alleyoop
|
|
|
|
Post by DaveC on Apr 8, 2014 20:07:15 GMT -5
Agree
As long as ya got it out, put a new one in
Good insurance
|
|
Freshman Rider
Currently Offline
Posts: 60
Likes: 2
Joined: Apr 4, 2014 10:41:18 GMT -5
|
Post by gizmo67 on Apr 9, 2014 11:09:05 GMT -5
Well just like you guys said, i put it back in just to see and still same outcome. My local cycle shop is closed today so if i cant find another shop that has it local have to wait ill tomm or order from online. I hate to wait for parts lol Will update when i get the part.
|
|
|
|
Post by alleyoop on Apr 9, 2014 13:28:34 GMT -5
Great! nothing you can do unless you can start it with the kickstarter if it has one.
Alleyoop
|
|
..BAD TO THE BONE..
