|
|
Post by UniqueSP on Mar 4, 2014 9:46:47 GMT -5
I made my oil catch can out of one of those plastic bottles people use to put ketchup in or the ones that women use to color their hair. Inside the bottle i put two stainless steel brillo pads to prevent the oil from blowing out the top from the air. At the bottom of the bottom i did a bunch of holes. and at the top where the spout it i cut it a little bigger and put a hose in it and some silicone to secure it. and ran the house down to my valve cover vent tube  |
|
New Rider
Currently Offline
Posts: 19 
Likes: 0
Joined: Feb 9, 2014 20:36:04 GMT -5
|
Post by wideopen on Mar 4, 2014 22:02:01 GMT -5
I tried a automotive plastic pant sprayer hopper with a 3/8 hose barb at the bottom broke the hopper in the process though. I think I have found the problem btw the head gasket looks blown there is oil all around the shroud near the header flange. Going to redo the engine again.. Be looking out for my new 177 stroker thread to pop up on the board, as soon as the kit gets here from scooter elements.
|
|
