|
|
Post by millsc on Jan 23, 2014 20:13:19 GMT -5
Got my 30mm carb and the motor apart, the kick start gear on the crank came right off used a pickle fork and a hammer came off first whack. I'll post picks of the build as I progress if I can figure out how to post pics lol.
|
|
|
|
Post by alleyoop on Jan 23, 2014 20:21:20 GMT -5
if you have trouble posting I will pm you my email address and I can post them for you  Alleyoop |
|
|
|
Post by millsc on Jan 23, 2014 20:22:26 GMT -5
I have pics of the tools I used to remove the gear id like to post
|
|
|
|
Post by alleyoop on Jan 23, 2014 20:25:05 GMT -5
Well to post you need a HOST, you can use Photobucket it is free just load them up there then click on share and the links come up and click on the IMG one, it copies it and then come here and paste.
Alleyoop
|
|
|
|
Post by millsc on Jan 23, 2014 21:46:18 GMT -5
tools used to remove the gear   |
|
|
|
Post by millsc on Jan 25, 2014 16:19:45 GMT -5
 taida 61mm jug slides right in no boring  |
|
|
|
Post by justbuggin2 on Jan 25, 2014 16:30:52 GMT -5
I will be watching this come together good luck to you and hope you can post lots of pics and info
|
|
|
|
Post by alleyoop on Jan 25, 2014 17:34:12 GMT -5
Millsc, did you happen to notice if the jug had a thinner wall than the one that was in there. Reason is not all 61s will fit a none bored out stock case. And the only way I see them fitting is if they shaved the jug and took off about 1mm off the outside.
Alleyoop
|
|
|
|
Post by millsc on Jan 25, 2014 18:50:44 GMT -5
Its 62.7mm the ncy 61mm is 62.5 they both fit easily, the kits both look pretty much the same except the ncy has a shorter piston.
|
|
|
|
Post by millsc on Jan 26, 2014 23:51:33 GMT -5
Several more upgraded parts to come they are listed in my signature as proposed plans which will happen. Shipping my head off to Buford so he can work his magic on it pics to follow.
|
|
|
|
Post by carasdad on Jan 27, 2014 11:16:29 GMT -5
Kinda jealous bro..looks like you are off to building a sweet ride though.  What stroker crank did you get? Glenn |
|
|
|
Post by millsc on Jan 27, 2014 11:19:48 GMT -5
Getting the 3mm x500 forged rod from scooter elements
|
|
|
|
Post by UniqueSP on Jan 27, 2014 15:08:47 GMT -5
Getting the 3mm x500 forged rod from scooter elements Was that you that ordered it yesterday? |
|
|
|
Post by JR on Jan 27, 2014 15:27:07 GMT -5
S.E. welcome back.
|
|
|
|
Post by millsc on Jan 27, 2014 16:03:34 GMT -5
Getting the 3mm x500 forged rod from scooter elements Was that you that ordered it yesterday? no hope you didn't give them the spacer? I'm ordering Thursday it will be ordered by Chris mills "millsc" |
|
..BAD TO THE BONE..
