Post by ronnoc923 on Aug 25, 2013 23:31:57 GMT -5
Sounds like I have a busy day tomorrow... Now for the clutch pulley I am not able to take it apart. After getting the big spring off and I have to unscrew the one clamp that covers the slider on the inside, I am not able to unscrew the clamp piece I put a decent amount of pressure into it and I got a blow torch and made it extremely hot so I could try to expand the metal and remove the piece but it still didn't budge. What would you recommend that I do to remove this piece? Maybe try getting it a little bit hotter with the torch and keep trying or soak it in some kind of solution.
And what would be a good way to clock the rings because whenever I put them into the right places they always want to move around when I am trying to put it back in the cylinder.
I will also buy a woodruff key and new crankshaft seal and see what happens.
And on a side note yes my tire pressure is good.... D8
And what would be a good way to clock the rings because whenever I put them into the right places they always want to move around when I am trying to put it back in the cylinder.
I will also buy a woodruff key and new crankshaft seal and see what happens.
And on a side note yes my tire pressure is good.... D8