New Rider
Currently Offline
Posts: 1 
Likes: 0
Joined: Jun 17, 2017 14:02:05 GMT -5
|
Post by rob617 on Jun 17, 2017 14:35:05 GMT -5
I have a Evo 2x big powerboard . When it is off the ground and I pull the throttle the wheel spins but when I stand on it it barely moves an it only moves when I pull the throttle a little. If I pull the throttle all the way I get full rpm's but no acceleration. The clutch drum still spins when the wheel isn't moving I don't know if that is relevant. Anybody please help I need my scooter to get back an forth to work.
|
|
|
|
Post by toddmaples on Jun 19, 2017 19:37:37 GMT -5
I have a Evo 2x big powerboard . When it is off the ground and I pull the throttle the wheel spins but when I stand on it it barely moves an it only moves when I pull the throttle a little. If I pull the throttle all the way I get full rpm's but no acceleration. The clutch drum still spins when the wheel isn't moving I don't know if that is relevant. Anybody please help I need my scooter to get back an forth to work. Belt slipping? clutch pads gone/worn away? |
|
|
|
Post by crawford on Jun 19, 2017 20:14:19 GMT -5
It sure sounds like you need to look at clutch pads and springs which hold them together. They are a very simple system so go for it
|
|
|
|
Post by toddmaples on Jun 23, 2017 2:29:04 GMT -5
It sure sounds like you need to look at clutch pads and springs which hold them together. They are a very simple system so go for it Trying blue springs in my ride tomm... Cant wait to see the difference accelerating from ~3k rpm instead of ~2k... |
|
|
|
Post by chewbaca on Jul 14, 2017 13:04:08 GMT -5
So to be clear..... the clutch bell moves independent of the rear wheel?
If that is what is going on your going to need to open up the gearbox. Something has happened in your gearbox your going to want a rebuild kit
|
|
