Freshman Rider
Currently Offline
Posts: 82
Likes: 0
Joined: Mar 3, 2013 18:40:24 GMT -5
|
Post by nate7504 on Mar 11, 2013 11:46:38 GMT -5
I noticed opposite the oil drain plug on the other side of the engine there is onother plus that faces outward,what is that for? Sorry I'm unable to post a pic.
|
|
|
|
Post by scooterelements on Mar 11, 2013 11:56:51 GMT -5
There are two. under your scooter where the drain plug is your filter. then under the CVT there is a nut there that is your main drain hole for oil.
|
|
|
|
Post by teddy554 on Mar 11, 2013 22:27:16 GMT -5
the 50cc are also like that
|
|
|
|
Post by alleyoop on Mar 11, 2013 22:43:19 GMT -5
Here it is on the left side: Alleyoop  |
|
Sophomore Rider
Currently Offline
Posts: 206
Likes: 1
Joined: Mar 3, 2013 3:24:11 GMT -5
|
Post by payneib on Mar 12, 2013 5:56:20 GMT -5
Does it ever make much difference if you only use one? I just pull the filter one out and drain through there, then flush through with clean oil before filling up. They look fairly level, I wouldn't be leaving much old oil behind would I, if any?
Ian
|
|
|
|
Post by wilds on Mar 12, 2013 7:02:11 GMT -5
I think it's easier to use the one on the other side when I have the bike on the side stand.
All oils drains out easily and there's no "getting hands full of oil" or any other mess...
|
|
Sophomore Rider
Currently Offline
Posts: 206
Likes: 1
Joined: Mar 3, 2013 3:24:11 GMT -5
|
Post by payneib on Mar 12, 2013 8:28:37 GMT -5
That's a good idea, but I like to check the filter, and as I'm opening one up anyway......
|
|
Freshman Rider
Currently Offline
Posts: 52
Likes: 1
Joined: Feb 28, 2013 14:36:32 GMT -5
|
Post by Abscooters on Mar 13, 2013 12:36:38 GMT -5
We only use the oil filter cap hole when we do oil changes. Gotta clean the filter anyway. We give the bike a little lean to make sure it all gets out.
Why open 2 holes
|
|
..BAD TO THE BONE..
